We are excited to announce our newest flooring product 2 ft. by 2 ft. tongue and groove Moisture-Resistant High Density Fiberboard Floor Tiles. The tiles are made from high-density fiberboard providing a durable, stunning, easy-to-use option for customizing commercial, residential, trade show and event spaces from the ground up! Any image or design can be applied directly to your floor space and have a UV laminate top surface coating to protect the graphic.

Featured

Installation Areas Include:

Business offices: entryways, lobbies, hallways, offices, conference rooms, break rooms

Retail: entryways, sales floor/showroom, checkout, break rooms, dressing rooms, offices, storage rooms

Hotels: entryways, lobbies, hallways, guest rooms, conference rooms, break rooms

Restaurants: entryways, lobbies, hallways, offices

Educational: entryways, lobbies, hallways, offices, classrooms, storage rooms, residence halls, common areas

Multi-Family Housing: entryways, lobbies, common areas, hallways, offices, storage rooms, individual housing units

Home Decor/Exhibits

 

Cleaning:

Vacuum to remove loose dust and dirt

Damp mop when necessary

Do not use vacuum beater bars or wet mops

Wipe up spills as quickly as possible

Remove scuffs or spots with multipurpose surface cleaner

Install a mat in entryway or other convenient location to help trap sand and gravel (this will prolong the image life)

 

Floating Installation:

Check schematic to be sure you understand the design (NOTE: Your floor design will drive your starting point. You may wish to start in the middle of the room, instead of at a corner, and work outward if your design features a strong central image.) If you are starting in a corner, install first panel with tongue facing room.

It is helpful to use double-sided tape on the back of the panels to create a more permanent first column

Apply glue to groove of panel being installed

Place groove onto tongue of first panel

Continue installing panels up the column

Immediately wipe up any seeping glue with damp rag

Making sure sublimation lines up, install next columns of panels

Joints should always meet at the midpoint of the panel in previous column

Place a piece of painter’s tape across glued joints to help hold them together as you progress across the room